X-ray micro-tomographic observations of hot tear damage in an Al-MG commercial alloy

Phillion, A.B.; Cockcroft, S.L.; Lee, P.D.

Please use this identifier to cite or link to this item: http://hdl.handle.net/11375/21566

Full metadata record

DC Field	Value	Language
dc.contributor.author	Phillion, A.B.	-
dc.contributor.author	Cockcroft, S.L.	-
dc.contributor.author	Lee, P.D.	-
dc.date.accessioned	2017-06-05T13:27:57Z	-
dc.date.available	2017-06-05T13:27:57Z	-
dc.date.issued	2006-09	-
dc.identifier.citation	Phillion, A. B., S. L. Cockcroft, and P. D. Lee. "X-ray micro-tomographic observations of hot tear damage in an Al–Mg commercial alloy." Scripta materialia 55.5 (2006): 489-492.	en_US
dc.identifier.other	10.1016/j.scriptamat.2006.03.035	-
dc.identifier.uri	http://hdl.handle.net/11375/21566	-
dc.description.abstract	X-ray micro-tomography and three-dimensional image analysis were used to characterize hot tearing. The formation and interconnectivity of deformation induced damage during hot tearing was quantified in specimens of DC cast aluminum alloy AA5182 (of composition Al-4.63%Mg-0.49%Mn-0.17%Fe-0.04%Cu) subjected to tensile load at a temperature of 528°C (fraction solid ~0.98) over a range of strains varying from 0 to 0.20 (failure). This technique also allowed for quantification of the porosity formed during DC casting.	en_US
dc.description.sponsorship	NSERC, EPSRC (GR/T26344), Alcan Intl.	en_US
dc.language.iso	en	en_US
dc.publisher	Elsevier	en_US
dc.subject	X-ray computed tomography	en_US
dc.subject	Hot tearing	en_US
dc.subject	High temperature deformation	en_US
dc.subject	Aluminum alloys	en_US
dc.subject	Tension test	en_US
dc.title	X-ray micro-tomographic observations of hot tear damage in an Al-MG commercial alloy	en_US
dc.contributor.department	Materials Science and Engineering	en_US
Appears in Collections:	Materials Science and Engineering Publications

Files in This Item:

File	Description	Size	Format
2006_ScrptMat_Phillion_etal..pdf Open Access		854.25 kB	Adobe PDF	View/Open

Show simple item record