Digital Data Transmission Using Single-Sideband Modulation
| dc.contributor.advisor | Haykin, S. S. | |
| dc.contributor.author | Ouzas, Nicholas | |
| dc.contributor.department | None | en_US |
| dc.date.accessioned | 2016-07-08T15:15:14Z | |
| dc.date.available | 2016-07-08T15:15:14Z | |
| dc.date.issued | 1979-10 | |
| dc.description.abstract | <p> The feasibility of using a partial response-encoded single-sideband (SSB) modulated signal for transmission of digital data in a radio system is considered. The principal methods of SSB signal generation and demodulation are examined, and the effects of carrier synchronization are determined. The effect of steady-state carrier phase errors on the error rate of an SSB partial response receiver is analyzed theoretically and by means of computer simulation. The analysis of a decision-directed SSB carrier phase tracking loop is presented and its performance is evaluated using computer simulation. The performance of the SSB partial response system after amplification by means of travelling-wave-tube (TWT) amplifiers is analyzed by using computer simulation. Finally, a comparison of an SSB partial response system and a quadrature partial response system (QPRS) is made.</p> | en_US |
| dc.description.degree | Master of Engineering (MEngr) | en_US |
| dc.description.degreetype | Thesis | en_US |
| dc.identifier.uri | http://hdl.handle.net/11375/19781 | |
| dc.language.iso | en_US | en_US |
| dc.subject | digital, data, transmission, single-sideband, modulation, synchronization | en_US |
| dc.title | Digital Data Transmission Using Single-Sideband Modulation | en_US |
| dc.type | Thesis | en_US |