Microprocessor Application in Walsh-Fourier Conversion
| dc.contributor.advisor | Kitai, R. | en_US |
| dc.contributor.author | Bansod, Pradeep N. | en_US |
| dc.contributor.department | Electrical Engineering | en_US |
| dc.date.accessioned | 2014-06-18T17:05:40Z | |
| dc.date.available | 2014-06-18T17:05:40Z | |
| dc.date.created | 2014-01-28 | en_US |
| dc.date.issued | 1975-11 | en_US |
| dc.description.abstract | <p>A microprocessor based system to convert the Walsh spectrum of a frequency limited signal to its Fourier spectrum has been designed and built. The entire processing hardware is implemented on a single PLS-401 card, which consists of an Intel 4004 microprocessor, read only memories to store the conversion program and matrices of constants, random access memories to store results, and input/output ports. The converter can process up to 32 coefficients, and utilizes an 8-bit word length. For test purposes, the Walsh spectra are programmed into a read only memory, and the Fourier spectra are displayed in binary form on an LED matrix. The maximum conversion time is 1.81 seconds, and the maximum absolute error is 2.03% of the largest possible coefficient.</p> | en_US |
| dc.description.degree | Master of Science (MS) | en_US |
| dc.identifier.other | opendissertations/8772 | en_US |
| dc.identifier.other | 9850 | en_US |
| dc.identifier.other | 5027859 | en_US |
| dc.identifier.uri | http://hdl.handle.net/11375/13941 | |
| dc.subject | Electrical Engineering | en_US |
| dc.subject | Electrical and Electronics | en_US |
| dc.subject | Electrical and Electronics | en_US |
| dc.title | Microprocessor Application in Walsh-Fourier Conversion | en_US |
| dc.type | thesis | en_US |
Files
Original bundle
1 - 1 of 1