Influence of Natural Convection on Design of Thermal Diodes

Abstract

Thermal diode, analogous to the electrical diode, is an emerging field of interest due to its potential application in thermal management, thermal shielding, and thermal circuits. Application of Phase Change Material (PCM) is among the different approaches proposed and analyzed to achieve high thermal rectification. However, these studies often limit the analysis to conduction heat transfer and neglect advection. In the present study, the influence of natural convection on conventional single PCM-based thermal diodes' thermal rectification has been analyzed. Natural convection enhances heat transfer in the inverse direction of gravity, augmenting thermal rectification of diodes with preferential flow in the opposite direction of gravity, whereas adversely affecting the performance of thermal diodes with preferential heat flow in the direction of gravity. Therefore, the design of thermal diode with preferential flow in gravity direction is modified to limit natural convection via the use of metal foam and baffles. The non-phase change material in a thermal diode with preferential flow in the direction inverse to the gravity is replaced with phase change material augmenting the natural convection because of the increase in length. The modified designs led to a mean thermal rectification enhancement of approximately 85% and 1275% in thermal diodes with preferential towards gravity and inverse to the gravity directions, respectively. A thermal rectification of more than 50 is achieved in a modified thermal rectifier for preferential flow in the direction inverse to the gravity.