Please use this identifier to cite or link to this item:
http://hdl.handle.net/11375/9019
Title: | Ultrafiltration of Alkalilignin Through Dynamic Membranes Formed of Feed Constituents |
Authors: | Horsti, Seppo Markku |
Advisor: | Benedek, Andrew |
Department: | Chemical Engineering |
Keywords: | Chemical Engineering;Chemical Engineering |
Publication Date: | Dec-1976 |
Abstract: | <p>Membranes formed by constituents of ultrafiltration feed solutions on a support structure are called dynamic membranes. Lignin has the ability to form a self-rejecting membrane potentially useful for separating lignin from pulping wastes.</p> <p>Lignin solutions and pulp mill wastes were circulated past support tubes at different operating conditions. A typical product flux was about 7 gal/ft²day with about 99% rejection. The effect of the feed solution concentration, the pore size of the support structure and the cross-flow velocity were small on the membrane performance. A temperature increase from 30ºC to 70ºC increased the product flux by 130%. A higher operating pressure increased the product flux only slightly above a critical pressure of about 80 psi. The product flux was highly dependent on the pH, being e.g. 30 gal/ft²day at pH2 and 7.5 gal/ftday at pH//.</p> <p>Some chemical additives, reported to alter liquid conformation, were tested and the best results were given by addition of formaldehyde. It increased the product flux at pH2 from 30 gal/ft²day to 42 gal/ft²day. A pretreatment of the carbon support tubes by hydrochloric acid improved the product flux from 6 gal/ft²day to 16 gal/ft²day but the beneficial effect, in this case, was time dependent.</p> |
URI: | http://hdl.handle.net/11375/9019 |
Identifier: | opendissertations/418 1196 881861 |
Appears in Collections: | Open Access Dissertations and Theses |
Files in This Item:
File | Size | Format | |
---|---|---|---|
fulltext.pdf | 3.49 MB | Adobe PDF | View/Open |
Items in MacSphere are protected by copyright, with all rights reserved, unless otherwise indicated.