Please use this identifier to cite or link to this item:
http://hdl.handle.net/11375/7186
Title: | Motion command generation for multi-axis machining |
Authors: | Fleisig, Robert V. |
Advisor: | Spence, Allan D. |
Department: | Mechanical Engineering |
Keywords: | Mechanical Engineering;Mechanical Engineering |
Publication Date: | Dec-2000 |
Abstract: | <p>In current industrial practice, the transformation of Computer-Aided Geometric Design surfaces into Computer Numerical Control (CNC) machine tool axis commands is performed with the aid of Computer-Aided Manufacturing software and a closed CNC machine tool controller. The advent of new technologies such as Open Architecture Control has enabled the rethinking of motion command generation. This thesis describes a five-axis motion command generation architecture and algorithms in which a parameterized tool-path is interpolated off-line and the inverse kinematics mapping is performed in real-time, on the CNC controller. This architecture eliminates the need for time consuming repost-processing of the tool-path in the event of kinematic changes and additionally introduces the benefits of parametric splines with controlled feedrate. To deterministically attain a near constant feedrate tool-path, near arc-length parameterized splines are prepared off-line. The C2 position spline which is near arclength parameterized improves on the previously reported research. The orientation unit vectors are interpolated with a C 2 spherical Bézier spline. These two splines are then synchronized by means of a monotonic reparameterization spline. This results in reduced effective feedrate oscillation. The interpolated tool-path and axis commands are demonstrated to be smooth and C2 continuous. To cope with actuator saturation, a feedrate interpolation algorithm is developed which ensures C2 continuity but allows the feedrate to be adjusted as needed. The developed algorithms were simulated for two tool-paths and two five-axis machines tools. A test part was cut to demonstrate geometric correctness.</p> |
URI: | http://hdl.handle.net/11375/7186 |
Identifier: | opendissertations/2473 3450 1383792 |
Appears in Collections: | Open Access Dissertations and Theses |
Files in This Item:
File | Size | Format | |
---|---|---|---|
fulltext.pdf | 5.13 MB | Adobe PDF | View/Open |
Items in MacSphere are protected by copyright, with all rights reserved, unless otherwise indicated.