Please use this identifier to cite or link to this item:
http://hdl.handle.net/11375/28062
Title: | Design, Control, and Implementation of a High Power Density Active Neutral Point Clamped Inverter For Electric Vehicle Applications |
Authors: | Poorfakhraei, Amirreza |
Advisor: | Emadi, Ali Narimani, Mehdi |
Department: | Electrical and Computer Engineering |
Keywords: | Electric Vehicles;Multilevel Inverters;Power Density;Powertrain;Traction Applications |
Publication Date: | 2022 |
Abstract: | Traction inverter, as a critical component in electrified transportation, has been the subject of many research studies in terms of topologies, modulation, and control schemes. Recently, some of the well-known electric vehicle manufacturers have utilized higher-voltage batteries to benefit from lower current, higher power density, and faster charging times. With the ongoing trend toward higher voltage DC-link in electric vehicles, some multilevel structures have been investigated as a feasible and efficient option for replacing the two-level inverters. Higher efficiency, higher power density, better waveform quality, and inherent fault-tolerance are the foremost advantages of multilevel inverters which make them an attractive solution for this application. The first contribution of this thesis is to investigate and present a comprehensive review of the multilevel structures in traction applications. Secondly, this thesis proposes an electro-thermal model based on foster equivalent thermal networks for a designed three-level active neutral point clamped (ANPC) inverter, as well as a modified sinusoidal pulse-width modulation (SPWM) -based technique. This electro-thermal model and the modulation technique enable temperature estimation in the inverter and minimization of the hotspot temperature and hence, increase the power density. Based on the experimental results derived from the implemented setup, a 12% increase in power density is achieved with the proposed technique. The other contribution is a reduced-complexity model-predictive controller (MPC) for the three-level ANPC inverter without weighting factors in which the number of calculations has dropped from 27 to 12 in each sampling period. The improvements to the structure and control system of the inverter are supported by theoretical analysis, simulation results, and experimental tests. A three-level inverter is implemented for 800 V, 70 kW operation and tested. 750 V Silicon Carbide (SiC) switches are utilized in the inverter structure. Finally, future trends and suggestions for the following studies are stated in this thesis. |
URI: | http://hdl.handle.net/11375/28062 |
Appears in Collections: | Open Access Dissertations and Theses |
Files in This Item:
File | Description | Size | Format | |
---|---|---|---|---|
poorfakhraei_amirreza_202211_phd.pdf | 16.74 MB | Adobe PDF | View/Open |
Items in MacSphere are protected by copyright, with all rights reserved, unless otherwise indicated.