Please use this identifier to cite or link to this item:
http://hdl.handle.net/11375/26970
Full metadata record
DC Field | Value | Language |
---|---|---|
dc.contributor.advisor | Wiebe, Lydell | - |
dc.contributor.advisor | Ezzeldin, Mohamed | - |
dc.contributor.author | Yassin, Ahmed | - |
dc.date.accessioned | 2021-10-04T19:41:29Z | - |
dc.date.available | 2021-10-04T19:41:29Z | - |
dc.date.issued | 2021 | - |
dc.identifier.uri | http://hdl.handle.net/11375/26970 | - |
dc.description.abstract | The structural damage after the Christchurch earthquake (2011) led to extensively damaged facilities that did not collapse but did require demolition, representing more than 70% of the building stock in the central business district. These severe economic losses that result from conventional seismic design clearly show the importance of moving towards resilience-based design approaches of structures. For instance, special reinforced masonry shear walls (SRMWs), which are fixed-base walls, are typically designed to dissipate energy through the yielding of bonded reinforcement while special detailing is maintained to fulfill ductility requirements. This comes at the expense of accepting residual drifts and permanent damage in potential plastic hinge zones. This design process hinders the overall resilience of such walls because of the costs and time associated with the loss of operation and service shutdown. In controlled rocking systems, an elastic gap opening mechanism (i.e., rocking joint) replaces the typical yielding of the main reinforcement in conventional fixed-base walls, hence reducing wall lateral stiffness without excessive yielding damage. Consequently, controlled rocking wall systems with limited damage and self-centering behavior under the control of unbonded post-tensioning (PT) are considered favorable for modern resilient cities because of the costs associated with service shutdown (i.e., for structural repairs or replacement) are minimized. However, the difficulty of PT implementation during construction is challenging in practical masonry applications. In addition, PT losses due to PT yielding and early strength degradation of masonry reduce the self-centering ability of controlled rocking masonry walls with unbonded post-tensioning (PT-CRMWs). Such challenges demonstrate the importance of considering an alternative source of self-centering. In this regard, the current study initially evaluates the seismic performance of PT-CRMWs compared to SRMWs. Next, a new controlled rocking system for masonry walls is proposed, namely Energy Dissipation-Controlled Rocking Masonry Walls (ED-CRMWs), which are designed to self-center through vertical gravity loads only, without the use of PT tendons. To control the rocking response, supplemental energy dissipation (ED) devices are included. This proposed system is evaluated experimentally in two phases. In Phase I of the experimental program, the focus is to ensure that the intended behavior of ED-CRMWs is achieved. This is followed by design guidance, validated through collapse risk analysis of a series of 20 ED-CRMW archetypes. Finally, Phase II of the experimental program evaluates a more resilient ED-CRMW is evaluated, which incorporates a readily replaceable externally mounted flexural arm ED device. Design guidance is also provided for ED-CRMWs incorporating such devices. | en_US |
dc.language.iso | en_US | en_US |
dc.subject | Controlled rocking, Experimental testing, Numerical modeling, Self-Centering, Reinforced masonry | en_US |
dc.title | DEVELOPMENT OF CONTROLLED ROCKING REINFORCED MASONRY WALLS | en_US |
dc.type | Thesis | en_US |
dc.contributor.department | Civil Engineering | en_US |
dc.description.degreetype | Thesis | en_US |
dc.description.degree | Doctor of Philosophy (PhD) | en_US |
Appears in Collections: | Open Access Dissertations and Theses |
Files in This Item:
File | Description | Size | Format | |
---|---|---|---|---|
Yassin_Ahmed_MA_202110_PhD.pdf | PhD Thesis | 8.49 MB | Adobe PDF | View/Open |
Items in MacSphere are protected by copyright, with all rights reserved, unless otherwise indicated.