Skip navigation
  • Home
  • Browse
    • Communities
      & Collections
    • Browse Items by:
    • Publication Date
    • Author
    • Title
    • Subject
    • Department
  • Sign on to:
    • My MacSphere
    • Receive email
      updates
    • Edit Profile


McMaster University Home Page
  1. MacSphere
  2. Open Access Dissertations and Theses Community
  3. Open Access Dissertations and Theses
Please use this identifier to cite or link to this item: http://hdl.handle.net/11375/25390
Full metadata record
DC FieldValueLanguage
dc.contributor.advisorBauman, Jennifer-
dc.contributor.advisorHabibi, Saeid-
dc.contributor.authorRiczu, Christina-
dc.date.accessioned2020-04-22T20:18:52Z-
dc.date.available2020-04-22T20:18:52Z-
dc.date.issued2020-
dc.identifier.urihttp://hdl.handle.net/11375/25390-
dc.descriptionModeling and Implementation of a Hardware Efficient Low-Voltage-To-Cell Battery Balancing Circuit for Electric Vehicle Range Extensionen_US
dc.description.abstractOne disadvantage of electric vehicles is their limited driving range when compared to internal combustion engine vehicles. Battery packs are also a significant cost to electric vehicle manufacturers, and lithium-ion battery cells must remain within controlled voltage limits. Thus, the requirements for the electric system are to be cost effective, perform battery management, and make it as efficient as possible to increase its range. Battery packs are typically constructed from around 100 battery cells in a series connection. During use of an electric vehicle, the battery cells become mismatched due to small differences in capacity. This effect is further amplified as the electric vehicle ages. Diverging cells cause issues during driving, since weak cells can limit the useable capacity of the vehicle. In order to use the whole capacity of the battery pack, and thus the entire range of the electric vehicle, the cells should be balanced. Strong cells should distribute their excess capacity to weaker cells during driving. The thesis presents the design, modeling and implementation of a novel hardware-efficient battery balancing circuit. First, the theory behind battery balancing is presented. Next, existing battery balancing circuits are compared. Finally, the proposed battery balancing circuit is discussed. The design of the proposed topology is examined in detail. Simulations show that the circuit transfers energy between non-adjacent cells throughout the entire pack. Experimental work is performed on two custom printed circuit boards, a 12 cell lithium-ion module, and a 12V lead acid battery. The results confirm the function of the prototype. The effect of the battery balancing circuit on driving range is examined with vehicle modeling simulations. A 2018 Chevrolet Bolt model is produced and capacity differences are given to each cell. The proposed topology balances the cells while driving, extending driving range on UDDS and HWFET drive cycles.en_US
dc.language.isoenen_US
dc.subjectLV2Cen_US
dc.subjectlow-voltage-to-cellen_US
dc.subjectcell balancingen_US
dc.subjectlithium-ionen_US
dc.subjectelectric vehicleen_US
dc.subjectrange extensionen_US
dc.titleModeling and Implementation of a Hardware Efficient Low-Voltage-To-Cell Battery Balancing Circuit for Electric Vehicle Range Extensionen_US
dc.title.alternativeLow-Voltage-To-Cell Battery Balancing Circuiten_US
dc.typeThesisen_US
dc.contributor.departmentElectrical and Computer Engineeringen_US
dc.description.degreetypeThesisen_US
dc.description.degreeMaster of Applied Science (MASc)en_US
dc.description.layabstractOne disadvantage of electric vehicles is their limited driving range when compared to internal combustion engine vehicles. Thus, there is a requirement to make the electric system as efficient as possible in order to increase its range. A large piece of the electric system includes the battery pack. Battery packs are typically constructed from around 100 battery cells in a series connection. During use of an electric vehicle, the battery cells become mismatched. This effect is also amplified as the electric vehicle ages. In order to use the whole capacity of the battery pack, and thus the entire range of the electric vehicle, the cells should be balanced. The thesis presents the design, modeling and implementation of a novel hardware efficient battery balancing circuit. The effect of the battery balancing circuit on driving range is examined.en_US
Appears in Collections:Open Access Dissertations and Theses

Files in This Item:
File Description SizeFormat 
Riczu_Christina_L_2020April_MASc.pdf
Access is allowed from: 2021-04-20
Modeling and Implementation of a Hardware Efficient Low-Voltage-To-Cell Battery Balancing Circuit for Electric Vehicle Range Extension10.86 MBAdobe PDFView/Open
Show simple item record Statistics


Items in MacSphere are protected by copyright, with all rights reserved, unless otherwise indicated.

Sherman Centre for Digital Scholarship     McMaster University Libraries
©2022 McMaster University, 1280 Main Street West, Hamilton, Ontario L8S 4L8 | 905-525-9140 | Contact Us | Terms of Use & Privacy Policy | Feedback

Report Accessibility Issue