Design and Implementation of a Micro-Computer Controlled Cutting Table

Zeuner, Alfred

Please use this identifier to cite or link to this item: http://hdl.handle.net/11375/24399

Full metadata record

DC Field	Value	Language
dc.contributor.advisor	Campbell, C. K.	-
dc.contributor.author	Zeuner, Alfred	-
dc.date.accessioned	2019-05-15T18:34:13Z	-
dc.date.available	2019-05-15T18:34:13Z	-
dc.date.issued	1982-05	-
dc.identifier.uri	http://hdl.handle.net/11375/24399	-
dc.description	This thesis is missing page vi, the page is not present in the other copies of this thesis. -Digitization Centre	en_US
dc.description.abstract	This thesis deals with the design and implementation of a micro-computer controlled cutting table used to prepare large scale patterns for Surface Acoustic Wave (SAW) devices. This automated cutting table simplifies the creation of many SAW patterns and makes previously unattainable patterns possible. The design is extremely versatile and can cut as well as straight lines in any direction in two dimensions. A commercially available, 44 inch square, cutting table was automated by mounting stepping motors on each of the two axis. The motion of the motors is controlled by an SDK-85 micro-computer and several peripherals. A full description of the hardware, software and a successful experimental test is included.	en_US
dc.language.iso	en	en_US
dc.subject	design	en_US
dc.subject	implementation	en_US
dc.subject	micro-computer	en_US
dc.subject	cutting table	en_US
dc.title	Design and Implementation of a Micro-Computer Controlled Cutting Table	en_US
dc.title.alternative	Micro-Computer Controlled Cutting Table	en_US
dc.type	Thesis	en_US
dc.contributor.department	Engineering Physics	en_US
dc.description.degreetype	Thesis	en_US
dc.description.degree	Master of Engineering (ME)	en_US
Appears in Collections:	Digitized Open Access Dissertations and Theses

Files in This Item:

File	Description	Size	Format
zeuner_alfred_n_1982May_masters.pdf Open Access		13.18 MB	Adobe PDF	View/Open

Show simple item record