Please use this identifier to cite or link to this item:
http://hdl.handle.net/11375/24192
Title: | Attenuation Correction in Positron Emission Tomography Using Single Photon Transmission Measurement |
Authors: | Dekemp, Robert A. |
Advisor: | Nahmias, C |
Department: | Physics |
Keywords: | pet, positron emission tomography, single photon transmission measurement, attenuation correction |
Publication Date: | Sep-1992 |
Abstract: | Accurate attenuation correction is essential for quantitative positron emission tomography. Typically, this correction is based on a coincidence transmission measurement using an external source of positron emitter, which is positioned close to the detectors. This technique suffers from poor statistical quality and high dead time losses, especially with a high transmission source strength. We have proposed and tested the use of single photon transmission measurement with a rotating rod source, to measure the attenuation correction factors (ACFs). The singles projections are resampled into the coincidence geometry using the detector positions and the r,)d source location. A nonparalyzable dead time correction algorithm was developed for the block detectors used in the McMaster PET scanner. Transaxial resolution is approximately 6 mm, which is comparable to emission scanning performance. Axial resolution is about 25 mm, with only crude source collimation. ACFs are underestimated by approximately 10% due to increased crossplane scatter, compared to coincidence transmission scanning. Effective source collimation is necessary to obtain suitable axial resolution and improved accuracy. The response of the correction factors to object density is linear to within 15%, when comparing singles transmission measurement to current coincidence transmission measurement. The major advantage of using singles transmission measurement IS a dramatically increased count rate. A factor of seven increase in count rate over coincidence scanning is possible with a 2 mCi transmission rod source. There are no randoms counted in singles transmission scans, which makes the measured count rate nearly linearly proportional with source activity. Singles detector dead time is approximately 6% in the detectors opposite a 2 mCi rod source. Present hardware and software precludes the application of this technique in a clinical environment. We anticipate that real time acquisition of detector singles can reduce the transmission scanning time to under 2 minutes, and produce attenuation coefficient images with under 2% noise. This is a significant improvement compared to the current coincidence transmission technique. |
URI: | http://hdl.handle.net/11375/24192 |
Appears in Collections: | Digitized Open Access Dissertations and Theses |
Files in This Item:
File | Description | Size | Format | |
---|---|---|---|---|
Dekemp_Robert_A_1992Sep_masters.pdf | 5.53 MB | Adobe PDF | View/Open |
Items in MacSphere are protected by copyright, with all rights reserved, unless otherwise indicated.