Skip navigation
  • Home
  • Browse
    • Communities
      & Collections
    • Browse Items by:
    • Publication Date
    • Author
    • Title
    • Subject
    • Department
  • Sign on to:
    • My MacSphere
    • Receive email
      updates
    • Edit Profile


McMaster University Home Page
  1. MacSphere
  2. Open Access Dissertations and Theses Community
  3. Open Access Dissertations and Theses
Please use this identifier to cite or link to this item: http://hdl.handle.net/11375/23721
Full metadata record
DC FieldValueLanguage
dc.contributor.advisorKevlahan, Nicholas-
dc.contributor.authorParvin, Afroja-
dc.date.accessioned2019-01-14T20:45:14Z-
dc.date.available2019-01-14T20:45:14Z-
dc.date.issued2018-
dc.identifier.urihttp://hdl.handle.net/11375/23721-
dc.description.abstractMathematical modeling of ocean waves is based on the formulation and solution of the appropriate equations of continuity, momentum and the choice of proper initial and boundary conditions. Under the influence of gravity, many free surface water waves can be modeled by the shallow water equations (SWE) with the assumption that the horizontal length scale of the wave is much greater than the depth scale and the wave height is much less than the fluid's mean depth. Furthermore, to describe three dimensional flows in the hydrostatic and Boussinesq limits, the multilayer SWE model is used, where the fluid is discretized horizontally into a set of vertical layers, each having its own height, density, horizontal velocity and geopotential. In this study, we used an explicit staggered finite volume method to solve single and multilayer SWE, with and without density stratification and bathymetry, to understand the dynamic of surface waves and internal waves. We implemented a two-dimensional version of the incompressible DYNAMICO method and compare it with a one-dimensional SWE. For multilayer SWE, we considered both two layer and a linear stratification of density, with very small density gradient, consistent with Boussinesq approximation. We used Lagrangian vertical coordinate which doesn't allow mass to flow across vertical layers. Numerical examples are presented to verify multilayer SWE model against single layer SWE, in terms of the phase speed and the steepness criteria of wave profile. In addition, the phase speed of the barotropic and baroclinic mode of two-layer SWE also verified our multilayer SWE model. We found that, for multilayer SWE, waves move slower than single layer SWE and get steeper than normal when they flow across bathymetry. A series of numerical experiment were carried out to compare 1-D shallow water solutions to 2-D solutions with and without density as well as to explain the dynamics of surface wave and internal wave. We found that, a positive fluctuations on free surface causes water to rise above surface level, gravity pulls it back and the forces that acquired during the falling movement causes the water to penetrate beneath it's equilibrium level, influences the generation of internal waves. Internal waves travel considerably more slowly than surface waves. On the other hand, a bumpy or a slicky formation of surface waves is associated with the propagation of internal waves. The interaction between these two waves is therefore demonstrated and discussed.en_US
dc.language.isoenen_US
dc.subjectMulti-layer Shallow water equationen_US
dc.subjectbathymetry,en_US
dc.subjectinternal waves,en_US
dc.subjectsurface waves,en_US
dc.subjectbarotropic mode,en_US
dc.subjectstaggered finite volume method.en_US
dc.titleOcean waves in a multi-layer shallow water system with bathymetryen_US
dc.typeThesisen_US
dc.contributor.departmentComputational Engineering and Scienceen_US
dc.description.degreetypeThesisen_US
dc.description.degreeMaster of Science (MSc)en_US
dc.description.layabstractIn the modelling of ocean wave, the formulation and solution of appropriate equations and proper initial and boundary conditions are required. The shallow water equations (SWE) are derived from the conservation of mass and momentum equations, in the case where the horizontal length scale of the wave is much greater than the depth scale and the wave height is much less than the fluid's mean depth. In multilayer SWE, the fluid is discretized horizontally into a set of vertical layers, each having its own height, density, horizontal velocity and geopotential. In this study, we used an explicit staggered finite volume method to solve single and multilayer SWE, with and without density stratification and bathymetry, to understand the dynamic of surface waves and internal waves. A series of numerical experiments were carried out to validate our multilayer model. It is found that, in the presence of density differences, surface waves for the multilayer SWE move slowly and get more steep than normal when they flow across bathymetry. Also, a positive fluctuations on free surface generates internal waves at the interior of ocean which propagate along the line of density gradient.en_US
Appears in Collections:Open Access Dissertations and Theses

Files in This Item:
File Description SizeFormat 
Parvin_Afroja_2018_June_MSc.pdf
Open Access
4.59 MBAdobe PDFView/Open
Show simple item record Statistics


Items in MacSphere are protected by copyright, with all rights reserved, unless otherwise indicated.

Sherman Centre for Digital Scholarship     McMaster University Libraries
©2022 McMaster University, 1280 Main Street West, Hamilton, Ontario L8S 4L8 | 905-525-9140 | Contact Us | Terms of Use & Privacy Policy | Feedback

Report Accessibility Issue