The Design and Construction of a Surface Analysis Station (Part A)
| dc.contributor.advisor | Robinson, J.E. | |
| dc.contributor.author | Cuthbert, John Richard | |
| dc.contributor.department | Engineering Physics | en_US |
| dc.date.accessioned | 2015-06-15T20:01:21Z | |
| dc.date.available | 2015-06-15T20:01:21Z | |
| dc.date.issued | 1979-09 | |
| dc.description | One of two project reports. Part B is available at http://hdl.handle.net/11375/17552 | en_US |
| dc.description.abstract | <p> The design, construction, and initial operation of a surface analysis station were undertaken. The final UHV system is equipped for ion surface scattering, low energy electron diffraction, Auger analysis, secondary ion mass spectroscopy and residual gas analysis. </p> <p> The main goal of this project was the preliminary operation of the ion surface scattering equipment. A complete beam transport system was constructed utilizing an Einzel lens and electrostatic quadroles. </p> <p> The ion surface scattering was effected through the use of a time-of-flight (TOF) technique to obtain an energy spectrum of particles backscattered from a target surface. The TOF spectrum and subsequent energy spectrum were for 5.1 keV hydrogen ions incident on a practical silver target. </p> | en_US |
| dc.description.degree | Master of Engineering (ME) | en_US |
| dc.description.degreetype | Thesis | en_US |
| dc.identifier.uri | http://hdl.handle.net/11375/17551 | |
| dc.language.iso | en | en_US |
| dc.subject | engineering physics | en_US |
| dc.subject | surface analysis station | en_US |
| dc.subject | design | en_US |
| dc.subject | construction | en_US |
| dc.title | The Design and Construction of a Surface Analysis Station (Part A) | en_US |