Please use this identifier to cite or link to this item:
http://hdl.handle.net/11375/9767
Full metadata record
DC Field | Value | Language |
---|---|---|
dc.contributor.advisor | Tlusty, J. | en_US |
dc.contributor.author | Elbestawi, Abdel Aziz Mohamed | en_US |
dc.date.accessioned | 2014-06-18T16:48:17Z | - |
dc.date.available | 2014-06-18T16:48:17Z | - |
dc.date.created | 2009-06-19 | en_US |
dc.date.issued | 1976-04 | en_US |
dc.identifier.other | opendissertations/486 | en_US |
dc.identifier.other | 1128 | en_US |
dc.identifier.other | 876632 | en_US |
dc.identifier.uri | http://hdl.handle.net/11375/9767 | - |
dc.description.abstract | <p>The purpose of this project was to analyze the Numerical and Adaptive Control system of a CNC milling machine, in order to improve the time response of the system while maintaining its stability. The available linear control theory as well as the state space method were used to study and simulate the behaviour of the N/C loop. The N/C system was tested to determine the practically optimum values of position and velocity gains. The Adaptive Control system consists of a cutting force transducer, and an Analog to Digital Processor which supply input to an A/C routine resident in the HP-2100A minicomputer. Both classical control theory and the state space technique were also used to investigate the operation of the A/C loop and to predict the response of the actual system.</p> | en_US |
dc.subject | Mechanical Engineering | en_US |
dc.subject | Mechanical Engineering | en_US |
dc.title | Analysis of a Numerical and Adaptive Control Servomechanism | en_US |
dc.type | thesis | en_US |
dc.contributor.department | Mechanical Engineering | en_US |
dc.description.degree | Master of Engineering (ME) | en_US |
Appears in Collections: | Open Access Dissertations and Theses |
Files in This Item:
File | Size | Format | |
---|---|---|---|
fulltext.pdf | 3.45 MB | Adobe PDF | View/Open |
Items in MacSphere are protected by copyright, with all rights reserved, unless otherwise indicated.