Please use this identifier to cite or link to this item:
http://hdl.handle.net/11375/9535Full metadata record
| DC Field | Value | Language |
|---|---|---|
| dc.contributor.advisor | Tlusty, J. | en_US |
| dc.contributor.author | MacNeil, Peter R. | en_US |
| dc.date.accessioned | 2014-06-18T16:47:33Z | - |
| dc.date.available | 2014-06-18T16:47:33Z | - |
| dc.date.created | 2009-06-22 | en_US |
| dc.date.issued | 1975-04 | en_US |
| dc.identifier.other | opendissertations/465 | en_US |
| dc.identifier.other | 1149 | en_US |
| dc.identifier.other | 878085 | en_US |
| dc.identifier.uri | http://hdl.handle.net/11375/9535 | - |
| dc.description.abstract | <p>The purpose of this project was to develop a CNC software base and an Adaptive Control system for a CNC milling machine. The CNC software base consists mainly of Assembly language routines written for the HP-2100 minicomputer for the editing and debugging of N/C data programs. The Adaptive Control system consists of a cutting force transducer, and an Analog to Digital Processor which supply input to an A/C routine resident in the HP-2100 minicomputer. The Adaptive Control system and the cutting forces encountered in milling were simulated in computer programs. The system was stabilized by using the simulation to predict the response of the actual system.</p> | en_US |
| dc.subject | Mechanical Engineering | en_US |
| dc.subject | Mechanical Engineering | en_US |
| dc.title | Computer Adaptive Control in Milling | en_US |
| dc.type | thesis | en_US |
| dc.contributor.department | Mechanical Engineering | en_US |
| dc.description.degree | Master of Engineering (ME) | en_US |
| Appears in Collections: | Open Access Dissertations and Theses | |
Files in This Item:
| File | Size | Format | |
|---|---|---|---|
| fulltext.pdf | 5.19 MB | Adobe PDF | View/Open |
Items in MacSphere are protected by copyright, with all rights reserved, unless otherwise indicated.
