Skip navigation
  • Home
  • Browse
    • Communities
      & Collections
    • Browse Items by:
    • Publication Date
    • Author
    • Title
    • Subject
    • Department
  • Sign on to:
    • My MacSphere
    • Receive email
      updates
    • Edit Profile


McMaster University Home Page
  1. MacSphere
  2. Departments and Schools
  3. Faculty of Engineering
  4. Department of Mechanical Engineering
  5. Mechanical Engineering Publications
Please use this identifier to cite or link to this item: http://hdl.handle.net/11375/31174
Full metadata record
DC FieldValueLanguage
dc.contributor.authorEdrisi S-
dc.contributor.authorEnayati J-
dc.contributor.authorRahimnejad A-
dc.contributor.authorGadsden SA-
dc.date.accessioned2025-02-27T17:05:47Z-
dc.date.available2025-02-27T17:05:47Z-
dc.date.issued2024-04-01-
dc.identifier.issn1424-8220-
dc.identifier.issn1424-8220-
dc.identifier.urihttp://hdl.handle.net/11375/31174-
dc.description.abstractIn this paper, a Monte Carlo (MC)-based extended Kalman filter is proposed for a two-dimensional bearings-only tracking problem (BOT). This problem addresses the processing of noise-corrupted bearing measurements from a sea acoustic source and estimates state vectors including position and velocity. Due to the nonlinearity and complex observability properties in the BOT problem, a wide area of research has been focused on improving its state estimation accuracy. The objective of this research is to present an accurate approach to estimate the relative position and velocity of the source with respect to the maneuvering observer. This approach is implemented using the iterated extended Kalman filter (IEKF) in an MC-based iterative structure (MC-IEKF). Re-linearizing dynamic and measurement equations using the IEKF along with the MC campaign applied to the initial conditions result in significantly improved accuracy in the estimation process. Furthermore, an observability analysis is conducted to show the effectiveness of the designed maneuver of the observer. A comparison with the widely used UKF algorithm is carried out to demonstrate the performance of the proposed method.-
dc.publisherMDPI-
dc.subject4007 Control Engineering, Mechatronics and Robotics-
dc.subject40 Engineering-
dc.subject4001 Aerospace Engineering-
dc.titleA Monte Carlo-Based Iterative Extended Kalman Filter for Bearings-Only Tracking of Sea Targets-
dc.typeArticle-
dc.date.updated2025-02-27T17:05:46Z-
dc.contributor.departmentMechanical Engineering-
dc.identifier.doihttps://doi.org/10.3390/s24072087-
Appears in Collections:Mechanical Engineering Publications

Files in This Item:
File Description SizeFormat 
104-sensors-24-02087.pdf
Open Access
Published version4.11 MBAdobe PDFView/Open
Show simple item record Statistics


Items in MacSphere are protected by copyright, with all rights reserved, unless otherwise indicated.

Sherman Centre for Digital Scholarship     McMaster University Libraries
©2022 McMaster University, 1280 Main Street West, Hamilton, Ontario L8S 4L8 | 905-525-9140 | Contact Us | Terms of Use & Privacy Policy | Feedback

Report Accessibility Issue