Please use this identifier to cite or link to this item:
http://hdl.handle.net/11375/29086
Full metadata record
DC Field | Value | Language |
---|---|---|
dc.contributor.advisor | Didar, Tohid | - |
dc.contributor.author | Najm, Lubna | - |
dc.date.accessioned | 2023-10-20T18:44:51Z | - |
dc.date.available | 2023-10-20T18:44:51Z | - |
dc.date.issued | 2023 | - |
dc.identifier.uri | http://hdl.handle.net/11375/29086 | - |
dc.description.abstract | Early-onset diagnostics, or the detection of disease before clinical symptoms arise, has gained traction for its potential to improve patient quality of life and health outcomes. Biosensors, found in point-of-care (POC) devices, facilitate early-onset diagnostics and disease monitoring by addressing the limitations of current diagnostics strategies, which include timeliness, cost-effectiveness, and accessibility. Biosensors often incorporate microarrays within their design to allow for the detection of disease-associated biomolecules, known as biomarkers. Microarrays are composed of capture biomolecules, such as monoclonal antibodies, that are immobilized through either contact or non-contact printing techniques. In the following thesis, we investigated microarray designs within novel biosensing platforms for diagnostic and disease monitoring applications. First, we highlighted the advantages and challenges of implementing different types of biosensors, detection methods, and biomolecule immobilization strategies. Additionally, we proposed a novel 3D microarray incorporating hydrogels composed purely of crosslinked bovine serum albumin (BSA) proteins decorated with capture antibodies (CAbs). Utilizing industry-standard inkjet printing, we developed and optimized a two-step fabrication protocol, by which BSA proteins and CAbs are printed first, followed by the crosslinking agent, 1-Ethyl-3-[3-dimethylaminopropyl]carbodiimide (EDC). Characterization of the unique three-dimensional (3D) microstructure and hydrogel parameters and conducting comparisons with standard two-dimensional (2D) microdots, showed that increasing biosensor surface area led to a 3X increase in signal amplification. The limits of detection (LODs) for cytokine biomarkers were 0.3pg/mL for interleukin-6 (IL-6) and 1pg/mL for tumor necrosis factor receptor I (TNF RI), which were highly sensitive compared to reported LODs from literature. Alongside the investigation of novel printing protocols, proof-of-concepts for multiplex detection and distinguishing clinical patient samples from healthy donors were also presented. Overall, this thesis demonstrated the fabrication and optimization of microarray development shows promise in improving current biosensor designs, allowing for enhanced early-onset disease detection and monitoring. | en_US |
dc.language.iso | en | en_US |
dc.subject | Biosensors | en_US |
dc.subject | Microarrays | en_US |
dc.subject | Bioprinting Techniques | en_US |
dc.subject | Multiplex Detection | en_US |
dc.subject | Diagnostics | en_US |
dc.title | Investigating and Optimizing Biomarker Microarrays to Enhance Biosensing Capabilities for Diagnostics | en_US |
dc.type | Thesis | en_US |
dc.contributor.department | Biomedical Engineering | en_US |
dc.description.degreetype | Thesis | en_US |
dc.description.degree | Master of Applied Science (MASc) | en_US |
Appears in Collections: | Open Access Dissertations and Theses |
Files in This Item:
File | Description | Size | Format | |
---|---|---|---|---|
Najm_Lubna_ 2023 Sept_MASc.pdf | 4.37 MB | Adobe PDF | View/Open |
Items in MacSphere are protected by copyright, with all rights reserved, unless otherwise indicated.