Skip navigation
  • Home
  • Browse
    • Communities
      & Collections
    • Browse Items by:
    • Publication Date
    • Author
    • Title
    • Subject
    • Department
  • Sign on to:
    • My MacSphere
    • Receive email
      updates
    • Edit Profile


McMaster University Home Page
  1. MacSphere
  2. Open Access Dissertations and Theses Community
  3. Open Access Dissertations and Theses
Please use this identifier to cite or link to this item: http://hdl.handle.net/11375/23959
Full metadata record
DC FieldValueLanguage
dc.contributor.advisorMaly, Monica-
dc.contributor.advisorKeir, Peter-
dc.contributor.authorBulbrook, Brittany-
dc.date.accessioned2019-03-01T21:17:02Z-
dc.date.available2019-03-01T21:17:02Z-
dc.date.issued2019-
dc.identifier.urihttp://hdl.handle.net/11375/23959-
dc.description.abstractBackground: Muscle thickness, pennation angle, and fascicle length describe the architecture of a muscle. These properties can be observed alongside subcutaneous fat thickness using ultrasonography; however, measurement is sensitive to the angle of the transducer against the skin. Typically, the transducer is held perpendicular to skin for imaging. Nonetheless, a convenient, reliable method to ensure transducer angle consistency has not been reported. Objectives: The purpose of this study was to determine the influence of transducer angle on muscle architecture and subcutaneous fat measurements of quadriceps muscles (vastus lateralis and rectus femoris) in healthy young adults. A secondary objective was to determine intra- and inter-rater reliability. Methods: Thirty men and women were recruited (25±2.5 years; BMI: 22.6±3.0 kg/m2). Ultrasound images were acquired from two muscles. An image was taken at an estimated perpendicular angle to the skin. Then, using a 3D-printed device with a protractor that attached to the ultrasound transducer, images were taken at measured angles 5-10˚ medial and lateral to perpendicular. Agreement and error were determined using intraclass correlation coefficients (ICCs) and standard error measurements (SEMs). Results: Good to excellent agreement was demonstrated for muscle and fat thicknesses regardless of transducer angle (ICC >0.66). Intra-rater reliability was excellent for all outcomes within both muscles (ICC >0.89). Inter-rater reliability for the rectus femoris was good to excellent for all transducer angles except for measurements of fascicle lengths at 85° (ICC: 0.33–0.99). Inter-rater reliability improved >20% for the vastus lateralis with the device. Conclusion: Measurements of muscle pennation angle and fascicle lengths, but not muscle or subcutaneous fat thicknesses, were sensitive to transducer angle. Reliability of pennation angle and fascicle lengths improved with the use of our device. Using our device, reliable muscle architecture measures can be made for the rectus femoris and the vastus lateralis in healthy young adults.en_US
dc.language.isoenen_US
dc.subjectMuscleen_US
dc.subjectMuscle Architectureen_US
dc.subjectUltrasounden_US
dc.subjectMuscle Thicknessen_US
dc.subjectMuscle Thicknessen_US
dc.subjectFat Thicknessen_US
dc.subjectPennation Angleen_US
dc.subjectFascicle Lengthen_US
dc.subjectReliabilityen_US
dc.subjectIntra-rateren_US
dc.subjectInter-rateren_US
dc.subjectImagingen_US
dc.titleSTANDARDIZATION OF MUSCLE ARCHITECTURE MEASUREMENTS OF THE VASTUS LATERALIS AND RECTUS FEMORIS FROM IN VIVO ULTRASOUND IMAGES IN HEALTHY ADULTSen_US
dc.title.alternativeSTANDARDIZING MEASURES OF QUADRICEPS MUSCLE ARCHITECTUREen_US
dc.typeThesisen_US
dc.contributor.departmentKinesiologyen_US
dc.description.degreetypeThesisen_US
dc.description.degreeMaster of Science (MSc)en_US
dc.description.layabstractThe arrangement of small muscle components, known as fascicles, can be observed in humans using ultrasound imaging. These fascicle arrangements can be measured to improve understanding of muscle function and disease processes. A potential problem of viewing muscle with ultrasound is that the angle of the probe head against the skin can alter the appearance of the muscle fascicles. The goal of this research was to improve current methods of ultrasound imaging of two thigh muscles. We have created a novel 3D-printed device to attach to the existing ultrasound probe. This 3D-printed device stabilizes the ultrasound probe head; and accurately determines the angles between the ultrasound probe head and the surface of the skin. In this study, the use of this device improved reliability of our ultrasound images by >20%. Future use of this device may improve measurements of muscle fascicles acquired with ultrasound imaging.en_US
Appears in Collections:Open Access Dissertations and Theses

Files in This Item:
File Description SizeFormat 
Bulbrook_Brittany_D_1902_MSc.pdf
Access is allowed from: 2020-02-22
2.65 MBAdobe PDFView/Open
Show simple item record Statistics


Items in MacSphere are protected by copyright, with all rights reserved, unless otherwise indicated.

Sherman Centre for Digital Scholarship     McMaster University Libraries
©2022 McMaster University, 1280 Main Street West, Hamilton, Ontario L8S 4L8 | 905-525-9140 | Contact Us | Terms of Use & Privacy Policy | Feedback

Report Accessibility Issue