Please use this identifier to cite or link to this item:
http://hdl.handle.net/11375/21781
Title: | Ion Implanted Bragg Gratings in Silicon-On-Insulator Rib Waveguides |
Authors: | Bulk, Michael |
Advisor: | Jessop, P.E. |
Department: | Engineering Physics |
Keywords: | ion, implanted bragg gratings, silicon, insulator, rib waveguides |
Publication Date: | 2008 |
Abstract: | <p> Ion implanted Bragg gratings integrated in rib waveguide structures were simulated, fabricated and characterized for the silicon-on-insulator (SOI) photonics platform. After selective silicon self-implantation, to an amorphizing dose of 2x10^15 ions/cm^2, the approximately 0.3 damage-induced increase in the refractive index provided the modulation mechanism necessary for the formation of a Bragg grating. The benefits of implanted Bragg gratings compared to the more widely utilized surface relief type gratings include planar surface retention, desirable for subsequent processing and wafer bonding, and a smaller depth of the index modulation, important for minimizing filtering bandwidths. To our knowledge, this is the first time ion implantation has been utilized to produce Bragg gratings integrated in an SOI rib waveguide. The benefits of using SOI for an optoelectronics platform include: cost minimization, reduced device size, and compatibility with silicon based microelectronics.</p> <p> Device performance was simulated using coupled mode theory (CMT) in conjunction with beam propagation methods (BPM), to determine transverse modal profiles for computing coupling coefficients and to determine geometric dimensions suitable to achieve adequate grating strength and single-mode operation. The Monte Carlo ion implantation simulator SUSPREM4, implementing the binary collision approximation (BCA), was used to determine the amorphous silicon grating profiles. Implanted grating devices were then fabricated into SOI having a 2.5 μm device layer and were optically characterized. For a grating length of 2100 μm and an implant energy of 60 keV, the extinction ratio of the resonant wavelength was found to be -18.11 dB and -0.87 dB for TE and TM polarizations respectively. The excess loss per unit length was measured to be 1.2 dB/mm for TE polarization and 0.6 dB/mm for TM polarization. After annealing the gratings at temperatures of up to 300 °C, used to annihilate low energy point defects responsible for absorption, it was found that the excess loss per unit length was reduced to 0.3 dB/mm for TE polarization. Compared to etched gratings with similar dimensions, it was determined that the strength of the implanted gratings was approximately 2.5 times stronger for grating lengths one third the length as result of mode-shifting due to the higher index of refraction. This is of great consequence to the miniaturization and densification of Bragg grating based devices in silicon photonics.</p> |
URI: | http://hdl.handle.net/11375/21781 |
Appears in Collections: | Digitized Open Access Dissertations and Theses |
Files in This Item:
File | Description | Size | Format | |
---|---|---|---|---|
Bulk_Michael_2008_Masters..pdf | 11.65 MB | Adobe PDF | View/Open |
Items in MacSphere are protected by copyright, with all rights reserved, unless otherwise indicated.