Skip navigation
  • Home
  • Browse
    • Communities
      & Collections
    • Browse Items by:
    • Publication Date
    • Author
    • Title
    • Subject
    • Department
  • Sign on to:
    • My MacSphere
    • Receive email
      updates
    • Edit Profile


McMaster University Home Page
  1. MacSphere
  2. Open Access Dissertations and Theses Community
  3. Open Access Dissertations and Theses
Please use this identifier to cite or link to this item: http://hdl.handle.net/11375/19012
Full metadata record
DC FieldValueLanguage
dc.contributor.advisorLatulippe, David-
dc.contributor.authorCobbledick, Jeffrey-
dc.date.accessioned2016-04-01T20:20:44Z-
dc.date.available2016-04-01T20:20:44Z-
dc.date.issued2016-
dc.identifier.urihttp://hdl.handle.net/11375/19012-
dc.description.abstractThere is growing interest in the use of high performance anaerobic digestion (AD) processes for the production of biogas at wastewater treatment facilities to offset the energy demands associated with wastewater treatment. Recuperative thickening (RT) is a promising technique which involves recycling a portion of the digested solids back to the incoming feed. In general there exists a significant number of knowledge gaps in the field of RT because the studies that have been conducted to date have almost exclusively occurred in pilot or full scale trials; this approach greatly limits the amount of process optimization that can be done in a given trial. In this work, a detailed and comprehensive study of RT processes was conducted at the lab scale; a demonstration of the optimization of polymer assisted dewatering is given and biogas production and quality monitored. Two custom designed digesters (capacity = 1.5 L) were operated in parallel with one acting as a ‘control’ digester and the other operating under a semi-batch RT mode; both digesters were also operated in parallel under RT with alternative polymer flocculants. There were no significant changes in the overall biogas methane composition; however the RT digester had an average biogas productivity over two times higher than the control one. It was found that the recycling of the polymer flocculant back into the RT digester resulted in a significant improvement in dewatering performance. At the highest polymer concentration tested, all polymer flocculants demonstrated equivalent dewatering performance achieving over 6 times lower CST’s than the control; at lower polymer concentrations the 4516 polymer flocculant had superior dewatering performance. Thus, there exists an opportunity to decrease the overall consumption of polymer flocculants through judicious selection of the flocculant and the dose that is used both for the thickening and end-stage dewatering processes in RT digesters.en_US
dc.language.isoenen_US
dc.subjectAnaerobic Digestionen_US
dc.subjectDewateringen_US
dc.subjectPolymer Optimizationen_US
dc.subjectBiogas Productionen_US
dc.titleOPTIMIZING POLYMER ASSISTED DEWATERING IN RECUPERATIVE THICKENING VIA A LAB-SCALE SYSTEM FOR ENHANCED BIOGAS PRODUCTION IN ANAEROBIC DIGESTION PROCESSESen_US
dc.typeThesisen_US
dc.contributor.departmentChemical Engineeringen_US
dc.description.degreetypeThesisen_US
dc.description.degreeMaster of Applied Science (MASc)en_US
dc.description.layabstractIn wastewater treatment (WWT), solid wastes are treated using a technique called anaerobic digestion (AD) which involves the conversion of solids in biogas by anaerobic bacteria. Biogas is a mixture of mostly methane and carbon dioxide and can be used as a fuel source for energy production. There’s growing interest in the use of high performance AD processes for the production of biogas at WWT facilities to offset the energy demands associated with WWT. Recuperative thickening (RT) is a promising technique which involves recycling a portion of the digested solids back to the digester. In this work, a detailed and comprehensive study of RT processes was conducted at the lab scale; a demonstration of the optimization of polymer assisted dewatering is given and biogas production and quality monitored. Two 1.5 L custom designed digesters were operated in parallel one as a ‘control’ and the other operating under a semi-batch RT.en_US
Appears in Collections:Open Access Dissertations and Theses

Files in This Item:
File Description SizeFormat 
Cobbledick_Jeffrey_P_201603_MASc_Thesis.pdf
Access is allowed from: 2017-03-30
Final edited thesis3.1 MBAdobe PDFView/Open
Show simple item record Statistics


Items in MacSphere are protected by copyright, with all rights reserved, unless otherwise indicated.

Sherman Centre for Digital Scholarship     McMaster University Libraries
©2022 McMaster University, 1280 Main Street West, Hamilton, Ontario L8S 4L8 | 905-525-9140 | Contact Us | Terms of Use & Privacy Policy | Feedback

Report Accessibility Issue