K-Joints of Double Chord Square Hollow Sections

Abstract

<p> Trusses and Vierendeel girders are usually built from a single chord HSS "Hollow Structural Sections", but the largest HSS size as produced in Canada may limit its use for longer span applications. Therefore, the possibility of using double chord sections to enable the use of HSS for longer span trusses without the need for manufacturing new larger sections, presented itself. </p> <p> A new concept utilizing double chord square hollow sections in welded K-joints of Warren trusses is described. The experimental results of 29 tests are reported, including four connections types — standard, channel, bolted and back-to-back. The latter type comprised of gapped, overlapped and gapped with connecting stiffener plates. </p> <p> The results indicate that the standard type is an excellent joint in both strength and stiffness. The channel type is generally susceptible to twisting. It was found adequate only when a significant increase in chord thickness (≃ 50%) was employed. The bolted connection appears to hold promise when on-site assembly of large trusses is necessary. Its performance was further improved by connecting the chords with small tie bars. The back-to-back type needed to be reinforced or fully overlapped to develop full branch member strength. </p> <p> The double chord system of connection reveals itself to be much superior in strength to an equivalent single chord joint. </p> <p> The effects of eccentricity, branch member to chord angle, and chord preloading were investigated. Interaction formulae are presented for the standard and channel type joints which suffered from a chord failure at the connection. </p> <p> Results of four T-type connections using the double chord concept are also reported and were recently published in the ASCE (8). </p>