Skip navigation
  • Home
  • Browse
    • Communities
      & Collections
    • Browse Items by:
    • Publication Date
    • Author
    • Title
    • Subject
    • Department
  • Sign on to:
    • My MacSphere
    • Receive email
      updates
    • Edit Profile


McMaster University Home Page
  1. MacSphere
  2. Open Access Dissertations and Theses Community
  3. Open Access Dissertations and Theses
Please use this identifier to cite or link to this item: http://hdl.handle.net/11375/18238
Full metadata record
DC FieldValueLanguage
dc.contributor.advisorBone, Gary M.-
dc.contributor.authorZhang, Yile-
dc.date.accessioned2015-09-25T18:50:03Z-
dc.date.available2015-09-25T18:50:03Z-
dc.date.issued2015-11-
dc.identifier.urihttp://hdl.handle.net/11375/18238-
dc.description.abstractPneumatic actuators are low-cost, clean, safe and provide a high power to weight ratio. In this thesis, the modeling and position control of pneumatic actuators is presented. Sliding-mode control and model-predictive control algorithms are compared. The actuator’s main components consist of a double acting pneumatic cylinder and four two-way on/off valves. A nonlinear system model was developed. Its parameters were estimated from experiments. A novel friction model was presented and shown to be superior to the classical friction model. The system model was validated by comparing simulation and experiment results. Three novel nonlinear control algorithms are designed and compared with two existing state-of-the-art sliding-mode control (SMC) algorithms. Two of the novel algorithms are modified versions of the existing SMC algorithms. The third is a discrete-valued model predictive control (DVMPC) algorithm. The designs and performance of the five control algorithms were compared. Simulations and experiments demonstrated that the two modified SMC algorithms reduced both the position tracking errors and the valve switching frequency. Reducing a valve’s switching frequency has the benefit of prolonging its life. In the experiments on a cylinder with high friction seals, the steady state errors reduced 42% to ±0.3 mm. The valve switching frequency was also reduced by 34%. The switching frequency was further reduced by 32%, without significantly affecting the tracking performance, by incorporating a 5 ms zero-order hold. The five algorithms were simulated and compared on a high friction cylinder and a low friction cylinder to demonstrate their generality. In the simulations, the position tracking performance with DVMPC was similar to the best SMC algorithm, and the valve switching frequency with DVMPC was 34% lower. The three novel controllers were shown to be robust to increased and decreased payload mass. The DVMPC calculation times demonstrated that future experimental implementation of DVMPC is possible.en_US
dc.language.isoenen_US
dc.titleComparison of Sliding-Mode Control and Model-Predictive Control Algorithms for Pneumatic Actuatorsen_US
dc.typeThesisen_US
dc.contributor.departmentMechanical Engineeringen_US
dc.description.degreetypeThesisen_US
dc.description.degreeMaster of Applied Science (MASc)en_US
dc.description.layabstractActuators produce forces and motions in machines. Pneumatic actuators are low-cost, clean, safe and provide a high power to weight ratio. In this thesis, the modeling and position control of pneumatic actuators is presented. The actuator’s main components consist of a pneumatic cylinder and four electronic valves. The dynamics of the actuator components are mathematically modelled. A novel friction model is presented. Each valve is switched either on (to allow airflow) or off (to prevent airflow) every few milliseconds using a computer-based control system. Three novel nonlinear control algorithms are designed and compared with two existing state-of-the-art algorithms. Simulation and experiments demonstrate that the three proposed control algorithms reduced the position tracking errors and valve switching frequency (leading to longer valve life) when applied to a pneumatic cylinder with high friction seals. The designed controllers are also simulated and compared on a lower friction cylinder to demonstrate their generality.en_US
Appears in Collections:Open Access Dissertations and Theses

Files in This Item:
File Description SizeFormat 
Zhang_Yile_201509_MASc.pdf
Access is allowed from: 2016-09-30
2.75 MBAdobe PDFView/Open
Show simple item record Statistics


Items in MacSphere are protected by copyright, with all rights reserved, unless otherwise indicated.

Sherman Centre for Digital Scholarship     McMaster University Libraries
©2022 McMaster University, 1280 Main Street West, Hamilton, Ontario L8S 4L8 | 905-525-9140 | Contact Us | Terms of Use & Privacy Policy | Feedback

Report Accessibility Issue