Please use this identifier to cite or link to this item:
http://hdl.handle.net/11375/15274
Full metadata record
DC Field | Value | Language |
---|---|---|
dc.contributor.advisor | Soleymani, Leyla | en_US |
dc.contributor.author | Pavlovski, Joey | en_US |
dc.date.accessioned | 2014-06-18T21:13:27Z | - |
dc.date.created | 2013-09-14 | en_US |
dc.date.issued | 2013-10 | en_US |
dc.identifier.other | opendissertations/8228 | en_US |
dc.identifier.other | 9269 | en_US |
dc.identifier.other | 4586880 | en_US |
dc.identifier.uri | http://hdl.handle.net/11375/15274 | - |
dc.description.abstract | <p>Renewable energy technologies and the development of cleaner and more environmentally friendly power have been at the forefront of research for the past few decades. Photovoltaic systems – systems that convert photon energy to electrical energy – are at the center of these research efforts. Decreasing the cost of energy production, through increasing the power conversion efficiency or decreasing the device cost, is a key factor in widespread use of these energy production systems. To increase the energy conversion efficiency, ideally, all useful photons should be absorbed by the solar cell; however, due to the large discontinuity in the refractive index at the solar cell/air interface, a large fraction of incidence light is lost due to reflection (30% loss in crystalline silicon cells). The currently used single and double layer anti-reflection coatings reduce the reflection losses, but their optimal performance is limited to a narrow range of wavelengths and angles of incidence. Moth-eye anti-reflection coatings are composed of patterned single layer films having a gradual decrease in refractive index from the solar cell surface to air. This study is focused on developing an inexpensive method for direct deposition of patterned films – in the form of moth-eye anti-reflection coatings – on solar cell surface.</p> <p>In this research, the creation of moth-eye anti-reflection coatings has been attempted through the process of electrodeposition. ZnO was chosen for the thin film material, and the ability to develop the required moth-eye structure by changing the electrodeposition parameters including temperature, applied potential, type and concentration of solution-borne species, and type of substrate was investigated. Using this method, pyramidal and hemispherical structures with a 100-200 nm diameter and 100-200 nm height were created directly on ITO substrates. Similar structures were also developed on silicon substrates. The anti-reflection properties of ZnO-coated silicon substrates were investigated by comparing their broadband and broad angle reflection-mode UV-VIS spectrum with uncoated silicon. The optimized ZnO-coated silicon substrate showed a reflectance of at most 20% for wavelengths between 400-1500 nm at angles of incidence less than 50<sup>O</sup>.</p> | en_US |
dc.subject | Electrodeposition of zinc oxide (ZnO) | en_US |
dc.subject | Motheye anti-reflection coatings | en_US |
dc.subject | zinc oxide nanomaterials | en_US |
dc.subject | anti-reflection coatings | en_US |
dc.subject | solar optical applications | en_US |
dc.subject | photovoltaics | en_US |
dc.subject | Engineering Science and Materials | en_US |
dc.subject | Materials Science and Engineering | en_US |
dc.subject | Operations Research, Systems Engineering and Industrial Engineering | en_US |
dc.subject | Engineering Science and Materials | en_US |
dc.title | Electrodeposition of Tunable Zinc Oxide Nanomaterials for Optical Applications | en_US |
dc.type | thesis | en_US |
dc.contributor.department | Engineering Physics | en_US |
dc.date.embargo | 2014-10-01 | - |
dc.description.degree | Master of Applied Science (MASc) | en_US |
dc.date.embargoset | 2014-10-01 | en_US |
Appears in Collections: | Open Access Dissertations and Theses |
Files in This Item:
File | Size | Format | |
---|---|---|---|
fulltext.pdf | 3.02 MB | Adobe PDF | View/Open |
Items in MacSphere are protected by copyright, with all rights reserved, unless otherwise indicated.